A.Crusher | |
Function: The waste scraps are big part, so we need this crusher to get very small scraps and then feed these small scraps to the recycling granulator. | |
Installation Power: | 11 KW |
Fully automatic conveying | 1 set |
Size: | 2mx2mx1.6m |
Weight: | 0.7T |
B. Granule Maker | |
Function: It is used to recycle the waste scrap to be granules again for making KT Board, egg tray, egg box and fruit tray etc. | |
No.1 Extruder | |
Function: The crushed small waste scrap will be feeded into the screw for heating to be liquid state. | |
Screw | Φ120 x1 set |
Reducer | 1 sets |
Motor | 1 set 4 pole,18.5kw |
Electrical cabinet | 1 set |
Function: This electric cabinet control the speed of the extruder rotating and also can set the temperature of each heating zone. The real temperature will be showed on the screen panel. | |
5 zones (No.1 Extruder ) | automatic temperature control |
Filter changer | 1 set |
Function: Control the manual filter changer so that we can filter the impurities of the recycling waste scraps. | |
Cooling Water Tank | |
Function: After extruded, the recycling gpps noodles are as like liquid state, so we need put them inside the water for cooling to be rigid. | |
Granule cutter | 1 set |
Function: After cooling and brushing the water out, the rigid gpps noodles will be entered into the cutter. There is round knife to cut the noodles to be granules. The speed canadjust the size of the granules. The speed faster, the granules smaller. | |
Speed adjustable Motor | 1 set 4 pole,1.1kw |
Capacity | 2-2.5T/24H |
Installation power | 45kw |
Weight | 2.5T |
Finished Product pictures: