QUOTATION OF EXTRUSION BLOW MOLDING MACHINEOG-90E
1.MACHINE PHOTO
（The photo is only for reference）
2.Production system of automatic high speed blow molding machine:
2.1Automatic high speed blow molding machine
| ModeL | Series ofOG-90 |
| The blow molding machine modelOG-90can produce bottle, kettle, can, bucket etc. The machine is especially designed for producing with material such as PE, PP etc. The product capacity can reach150cycles per hour (idle circle). | |
| Die head | Accumulator |
| Extrusion system | Imported automatic temperature controlling device. |
| Clamping device | Bi-directionalsynchronous clamping device with single double-axis cylinder. |
| Hydraulic system | The whole hydraulic system adopts imported servo motor energy-saving system which can save almost 50% power consumption. |
| Electric controlling system | Adopt importedtouch screen + PLC. Every electric component is in famous brand. |
Enclosure:
1. Technical data and parts instructions of blow molding machine for series of OG-90
| Model | OG-90E | |
| Max. volume of products(L) | 80 (according to product design) | |
| Extrusion system | ||
| Screw diameter（mm） | φ90 | |
| L/D | 25:1 | |
| Screwrotation speed (rev./min.) | 10-80 | |
| Plasticizing capacity（kg/h） | 150(HDPE) | |
| Barrel heating zone quantity (pcs) | 4 | |
| Barrel heating power (KW) | 25 | |
| Extrusion motor power (KW) | 45 | |
| Die head system | ||
| Max. accumulator volume (L) | 6 | |
| Max. ejectionspeed (kg/sec.) | 1 | |
| Max diameter ofdie (mm) | 350 | |
| Die head heating quantity (pcs) | 4 | |
| Die head heating power (KW) | 22 | |
| Clamping system | ||
| Platen dimension（W×H）（mm） | 900×800 | |
| Platen opening stroke（mm） | 450～1100 | |
| Max clamping force（KN） | 350 | |
| Bottom blowing system (optional) | ||
| Spreading stroke (mm) | 140-420 | |
| Blow pin up and down stroke (mm) | 150 | |
| Bottom blow up and down stroke (mm) | 250 | |
| Frame | ||
| Lifting stroke (mm) | 350 | |
| Lifting speed (mm/min.) | 30 | |
| Hydraulic system | ||
| Hydraulic system pressure（Mpa） | Small pump | without small pump when using servo system |
| Big pump | 14 | |
| Servo oil pump motor power (KW) | 18.5 | |
| Parison thickness controller hydraulic servo system (optional) | ||
| Rated pressure (Mpa) | 14 | |
| Rated flow (L/min.) | 23 | |
| Motor power of parison thickness（kW） | 4 | |
| Pneumatic system | ||
| Air source pressure (Mpa) | 0.7 | |
| Working pressure (Mpa) | 0.6 | |
| Air consumption (M3/ min.) | 0.4 | |
| Water source | ||
| Pressure of water supply (Mpa) | 0.3 | |
| Power source | ||
| Voltage | AC380V±10% | |
| Frequency | 50HZ | |
| Wiring system | Three phase four wires | |
| Total rated power (KW) | 116 | |
| Average consumption(KW/H) | 48 | |
| Machine weight（T） | 13 | |
| Machine dimension（LxWxH）m | 5.1x2.9x4.9 | |
2. Components
| Item | Technologycontent |
| Hydraulic system | |
| Oil pump | Servo oil pump:SUMITOMO(Japan) |
| Hydraulic valve | YUKEN(Japan) |
| Oil motor | Servo oil motor: PHASE (Italy) |
| Proportional valve | HNC(Taiwan) |
| Servo valve | MOOG (Japan) |
| Oil-way pressure control | Proportionpressure control |
| Seal part | DZ (Taiwan) / NOK (Japan) |
| Electronic system | |
| PLC | PANASONIC (Japan) |
| Touch screen | INOVANCE (China) |
| Frequency converter | RBCA罗宾康 |
| Contactor | SCHNEIDER(France) |
| Relay | OMRON(Japan) |
| Proximity switch | SCHNEIDER(France) |
| Electric ruler | GEFRAN (Italy) |
| Light curtain sensor | SENSORC (China) |
| Thickness servo control | MOOG (Japan) |
| Air switch | SCHNEIDER(France) |
| Solid relay | CRYDOM (USA) |
| Motor | SIMO (China) |
| Clamping system | |
| Form | Directhydraulicclamping,two-way synchronization mechanism |
| Driving form | Differentialmotion quick clamping,two-rod structure,large space for mold |
| Die head system | |
| Dieheadstructure | Accumulator type |
| Runner form | first-in first-out |
| Material of main runner part | 38CrMoAlA；42CrMo |
| Extrusion system | |
| Driving form | Frequency control |
| Material of barrel and screw | 38CrMoAlA |
| Heater | Casting-aluminum heating device |
| Pneumatic system | |
| Main air valve | AIRTAC (Taiwan) / EMC |
| Take out system(optional) | |
| Air cylinder | EMC |
